- Ansys Steel Fiber Concrete Siding
- Ansys Steel Fiber Concrete Decking
- Ansys Steel Fiber Concrete
- Ansys Steel Fiber Concrete Flooring
- Ansys Steel Fiber Concrete Board
DOI:
2.2 FE analysis of precast concrete structures 11. 2.3 Modelling with ANSYS software 12. 2.4 Failure surface models for concrete 14. 2.5 FE Modelling of steel reinforcement 18. 2.6 Remarks on ANSYS FE modelling of concrete 19. Concrete as a primary mechanism for development of inelastic deformations in the material. The reinforcing steel is uniaxial material which is also “smeared” throughout the concrete. A simplified bilinear model for the stress-strain behavior of steel is used, (Figure 3.). ANSYS IMPLEMENTATION.
Ansys Steel Fiber Concrete Siding
https://doi.org/10.11113/jt.v61.1771Keywords:
Composite columns, steel tube, finite element, steel fibers, slenderness ratioAbstract
The present study investigates the behavior of steel fiber reinforced concrete filled steel box columns (SFRCFSBC) targeting to enhance their strength. A nonlinear finite element model using ANSYS program has been developed to investigate the structural behavior of the inspected columns. The results obtained from that model has been compared with those calculated using Euro code (EC4), AISC/LRFD (2005) and the Egyptian Code of Practice for Steel Construction (ECPSC/LRFD 2007). The comparison indicated that the results of the model have been evaluated to an acceptable limit of accuracy. A parametric study was carried out to investigate the effect of wall thickness, column slenderness and percentage of steel fiber in concrete on the ultimate strength of composite columns. Confinement of the concrete core provided by the steel case was also investigated. It can be concluded from the results that a considerable increase in compressive and flexural strength may be gained by increasing the steel fiber percentage up to 4%. The highest rate of increase in strength for long columns was about 20% by using steel fiber percentage between 0.5% and 1.0%, while for short and medium columns was about 10% by using steel fiber percentage between 1% and 2%.
References
Mursi, M. and Uy, B. 2003. Strength of Concrete Filled Steel Box Columns Incorporating Interaction Buckling. Journal of Structural Engineering, ASCE. 129(5): 626–639.
Mursi, M. and Uy, B. 2004. Strength of Slender Concrete Filled High Strength Steel Box Columns. Journal of Constructional Steel Research. 60: 1825–1848.
Ansys Steel Fiber Concrete Decking
Schneider, S. P. 1998. Axially Loaded Concrete-Filled Steel Tubes. Journal of Structural Engineering, ASCE. 124(10): 1125–1138.
Euro code 4. 2004 Design of Composite Steel and Concrete Structures. Part 1.1, General Rules and Rules for Buildings (with UK national application document), DD ENV 1994-1-1. London (UK): British Standards Institution.
ANSI/AISC, 360-05. 2005 Specifications for Structural Steel Buildings (ASD/LRFD). Chicago, Illinois.
Egyptian Code of Practice for Steel Construction. 2007. LRFD, (Load and Resistance Factor Design).
Abdullah, S. 2012. Structural Behavior of Fiber Reinforced Concrete Filled Steel Box Columns. M.Sc. Thesis, Faculty of Engineering at Shoubra, Benha University, Egypt. 120.
ANSYS Verification Manual, Release 12.0. ANSYS, Inc. 2009. United States.
Mander, J. B., Priestley, M. J. N., and Park, R. 1988. Theoretical stress–Strain Model for Confined Concrete. Journal of Structural Engineering, ASCE. 114(8): 1804–1826.
Hu, H. T., Huang, C. S., Wu, M. H., and Wu, Y. M. 2003. Nonlinear Analysis of Axially Loaded Concrete-filled Tube Columns with Confinement Effect. Journal of Structural Engineering, ASCE. 129(10): 1322–1329.
Richart, F. E., Brandzaeg, A., and Brown, R. L. 1928. A Study Of The Failure of Concrete Under Combined Compressive Stresses. Bull. 185. Champaign (IL, USA): University of Illinois Engineering Experimental Station.
ACI. 1999. Building Code Requirements For Structural Concrete and Commentary. ACI 318-99. Detroit (USA): American Concrete Institute.
Saenz, L. P. 1964. Discussion of „Equation for the Stress–strain Curve of Concrete by P. Desayi, and S. Krishnan. Journal of the American Concrete Institute. 61: 1229–1235.
Hu, H. T., and Schnobrich, W. C. 1989. Constitutive Modeling of Concrete by Using Non-Associated Plasticity. Journal of Materials in Civil Engineering. 1(4):199–216.